Hot water cylinder repairs and replacement
Help with hot water cylinder faults, leaks, valves, controls and replacement planning across Surrey, Hampshire and Berkshire. We can assess the cylinder and surrounding plumbing, explain the likely cause and discuss repair or replacement options.
Hot water problems we can investigate
A lack of hot water is not always a failed cylinder. Valves, thermostats, immersion heaters, controls, circulation and the heat source can all affect the system, so diagnosis should come first.
Cylinder leaks
Leaks from the cylinder body, fittings, valves or accessible pipe connections.
No hot water
Fault finding where the cylinder is not heating or hot water is unavailable.
Poor hot-water recovery
Hot water taking too long to recover or running out sooner than expected.
Immersion heater issues
Assessment of accessible immersion-heater related faults and the surrounding cylinder arrangement.
Valve and control faults
Problems involving accessible motorised valves, thermostats or cylinder controls.
Cylinder replacement
Planning replacement where the existing cylinder is leaking, unsuitable, obsolete or no longer economical to repair.
Check the whole hot-water arrangement, not just the cylinder
The cylinder stores the hot water, but the fault may sit elsewhere in the system. We look at the symptoms, heat source, controls, valves and accessible cylinder components before deciding what needs attention.
Where an unvented cylinder is involved, work is limited to the scope that can legally and safely be carried out by appropriately qualified personnel.
When cylinder replacement needs more planning
Replacing a hot water cylinder can involve more than swapping one vessel for another. Size, controls, discharge arrangements, access and the property’s hot-water demand all matter.
Cylinder size
The replacement should suit the property’s normal hot-water demand and available space.
Access
Cupboards, lofts and tight plant areas can affect removal and installation.
Controls and valves
Existing controls may need to be retained, altered or replaced depending on the system.
Unvented requirements
Unvented systems have specific safety and discharge requirements and should only be worked on within verified competent scope.
Hot water cylinder work across Surrey, Hampshire and Berkshire
LDM Group UK covers Farnborough, Frimley, Camberley, Aldershot, Fleet, Farnham and surrounding areas. Availability depends on the job and location.
More plumbing and heating help
Hot water cylinder FAQs
Does no hot water mean the cylinder needs replacing?
No. Controls, valves, the boiler or immersion heater can all cause similar symptoms. The fault should be diagnosed before replacing the cylinder.
Can a leaking cylinder be repaired?
A leaking fitting or valve may be repairable. If the cylinder vessel itself has failed, replacement is normally required.
Do you work on unvented cylinders?
Work is only carried out where it falls within the verified competent scope required for the specific unvented system and task.
Can you help choose the right replacement cylinder size?
Yes. The property’s hot-water demand, available space, heat source and existing system all need to be considered.
Need plumbing, heating, gas or renewables help?
Tell us what you need help with and we’ll get back to you after reviewing the details. For urgent plumbing or heating problems, calling is usually the fastest option.
Send an enquiry
Use the form below and include as much detail as possible.
Need help with a hot water cylinder?
Send the cylinder type, symptoms and photos of the cylinder and surrounding pipework if accessible. This can help us understand the likely system before attending.